Parameter Setting of the Machine
WARNING: It is highly not recommended to change
these settings below as the machine is already
How to set
Press and hold
for about 6 seconds. The "PA" is
SET
shown on the display.
Press "+" or "-" to enter the value "15" (This is the
code for entering into the setting mode).
Display
Description
F1
Temperature of Bowl I under juice mode
F2
Temperature of Bowl II under juice mode
F3
C1
Protection when the temperature is low
C3
Liquid temperature during first stage
C4
Liquid temperature during second stage
A1
Sensor probe temperature for bowl I
A2
Sensor probe temperature for bowl II
A3
E1
Temperature difference under juice mode
E2
Time delay of compressor
Warranty
Any defect affecting the functionality of the ap-
pliance which becomes apparent within one year
after purchase will be repaired by free repair or re-
placement provided the appliance has been used
and maintained in accordance with the instructions
and has not been abused or misused in any way.
Your statutory rights are not affected. If the appli-
ance is claimed under warranty, state where and
Discarding & Environment
When decommissioning the appliance, the prod-
uct must not be disposed of with other household
waste. Instead, it is your responsibility to dispose to
your waste equipment by handing it over to a des-
ignated collection point. Failure to follow this rule
may be penalized in accordance with applicable
regulations on waste disposal. The separate col-
lection and recycling of your waste equipment at
the time of disposal will help conserve natural re-
ajusted to the optimal settings by the factory de-
fault. Change the setting only if it is necessary.
Then, press
consectively to select the parame-
SET
ter (display will show consectively) that you want to
change. The parameters are list below:
Setting range
1°C ~ 7°C
1°C ~ 7°C
Not applicable
-13°C ~ -3°C
5°C ~ 10°C
3°C ~ 8°C
-5°C ~ 5°C
-5°C ~ 5°C
Not applicable
1°C ~ 5°C
2 ~ 8 min
when it was purchased and include proof of pur-
chase (e.g. receipt).
In line with our policy of continuous product devel-
opment we reserve the right to change the product,
packaging and documentation specifications with-
out notice.
sources and ensure that it is recycled in a manner
that protects human health and the environment.
For more information about where you can drop off
your waste for recycling, please contact your local
waste collection company. The manufacturers and
importers do not take responsibility for recycling,
treatment and ecological disposal, either directly
or through a public system.
Factory default
2°C
2°C
-5°C
10°C
5°C
0°C
0°C
2°C
EN
2 min
19