Arktic 274224 Mode D'emploi page 11

b) Disassembly the dispensing tap:
• Ensure all the beverage are emptied inside the
bowl.
• Disassembly the tap before removing the bowl.
• Remove the pin (F) to release all the other parts.
• Use clean and warm water to wash the parts.
c) Remove the bowl and the lid:
• To remove the bowl lid (1) of the bowl (2) first,
follow these instructions & see Fig.13:
1)Lift the rear part of the lid;
2) Extract the bowl lid (1) from the retainer placed
at the front side.
• Then, raise the front part of the bowl to release it.
• Next, remove the bowl from its position by push-
ing slightly at the rear side. The bowl is detached
now.
Fig. 11
Fig. 12
Fig. 13
Click
Fig. 14
EN
11