Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
tone sounds and to activate automatic channel display
change for 3 channels.
NOTE!
The main station can display the temperature records of
maximum 3 remote sensors of the same type. In this ease
different channels (1, 2 or 3) must be set for each remote
sensor. (see Fig. 3, 23)
USING THE PROJECTOR
When using the power adapter, the projector will turn on
automatically and permanently.
Rotate the projector to project the light beam to a dark
background within 1-4 meters, the projected data will be
displayed on the dark background as shown in Fig. 6.
NOTE!
1. Press the
key to rotate the projection 180 degrees.
2. Adjust the quality of the projected data by turning the focus
wheel.
TEMPERATURE TREND
The temperature-trend indicator shows the trends of changes in
the forthcoming few minutes. Arrows indicate a rising, steady
or falling trend:
Arrow symbol
Temperature
rising
trend
LOW BATTERY INDICATOR
If the low battery indicator
window (Fig. 7), it indicates that the battery power of the remote
sensor is not high enough. Insert 2 new AA size batteries.
NOTE!
After inserting new batteries, press the [ RESET ] knob of the
remote sensor and the [ SENSOR ] key of the main station to
activate the automatic signal transmission again.
TECHNICAL DATA
MAIN STATION
Temperature
-5° C to 50° C (23° F to 122° F)
measurement range:
Time signal:
DCF
Power supply:
4.5V~300mA via AC power plug
(or 3V Lithium button cell CR2032 as a low
energy power supply)
steady
falling
appears in the outdoor temperature
DE
EN
FR
ES
19
Publicité
Table des Matières
