Festool ETS 150/3 EQ Notice D'utilisation D'origine page 11

- sanding wood and veneer prior to painting
- interim sanding of paint on surfaces
4 - 5
- sanding of thinly applied primer
- sanding of wood with sanding vlies
- sanding edges on wooden parts
- smoothing primed wooden surfaces.
3 - 4
- sanding full wooden and veneer edges
- sanding in the grooves/rebates of windows and
doors
- interim paint sanding on edges
- pre-sanding natural wood windows with sanding
vlies
- smoothing wood surfaces with sanding felt prior
to staining
- rubbing down stained surfaces with sanding
vlies
- rubbing down or removing excess lime paste with
sanding vlies
2 - 3
- interim paint sanding on stained surfaces
- cleaning natural wood window grooves with sand-
ing felt
1 - 2
- sanding stained edges
- sanding thermoplastic synthetics
10 Sanding base brakes
The sanding base is braked by a collar (2.2) in order
to prevent any uncontrolled excessive speed of the
sanding base. Because the collar wears down in
the course of time, it has to be replaced by a new
one (order no. 453 388) as soon as there is any
reduction in the braking effect.
11 Maintenance and care
Always remove the plug from the mains
supply socket before carrying out any work
on the machine!
The cooling air vents on the motor housing must
always be free of blockages and clean to ensure
air circulation.
Any maintenance or repair work requiring the mo-
tor housing to be opened may only be carried out
by an authorised service workshop.
12 Disposal
Do not throw the power tool in your household
waste! Dispose of machines, accessories and pack-
aging at an environmentally-responsible recycling
centre. Observe the valid national regulations.
EU only: European Directive 2002/96/EC stipu-
late that used electric power tools must be
collected separately and disposed of at an en-
vironmentally responsible recycling centre.
13 Warranty
For our tools, we give warranty for material and
production defects in accordance with the locally
applicable legal provisions, but in any case for at
least 12 months. Within the EU member states, the
warranty period is 24 months (verifi cation through
invoice or delivery note). Damage caused by, in
particular, natural wear, overloading, incorrect
handling, or damage caused by the operator, or
damage caused through use of the equipment con-
trary that specifi ed in the Operating Instructions, or
damage which was known at the time of purchase,
is not covered by the warranty. Furthermore, dam-
age caused by the use of non-original accessories
and consumable materials (e.g. sanding pads) is
also excluded. Complaints can only be recognised
if the tool is returned while still assembled to the
supplier or an authorised Festool Customer Serv-
ice workshop. Keep the Operating Instructions,
Safety Instructions, Spare Parts List and purchase
receipt in a safe place. Otherwise the respective,
current warranty conditions of the manufacturer
shall apply.
Note
Due to continuous research and development work,
we reserve the right to make changes to the techni-
cal content of this documentation.
REACH for Festool products, their accessories
and consumables
REACh is a European Chemical Directive that
came into effect in 2007. As "downstream users"
and product manufacturers, we are aware of our
duty to provide our customers with information.
We have set up the following website to keep you
updated with all the latest news and provide you
with information on all the materials used in our
existing products: www.festool.com/reach
11