Before Installation - Kerbl 296087 Mode D'emploi

7. Check card
Serial number
Installation location
(address + description)
Installation date
Name, address and signature
of the installation company
(stamp + signature)
Ensure that this card is filled in and signed by an authorised electrician and that it is kept safely.
CE declaration of conformity
Albert KERBL GmbH hereby declares that the product / device described in these instructions complies with the fundamental requirements and other relevant
stipulations and regulations. The CE mark confirms compliance with the Directives of the European Union.
Electrical waste
It is up to the operator to dispose of the product responsibly after its useful life in accordance with local regulations. Consult the relevant regulations for your country.
The device must not be disposed of in household waste. Under the terms of the EU Directive on the disposal of old electrical and electronic equipment, the device can
be taken to local authority-run refuse sites or recycling plants free of charge, or returned to dealers who offer a returns service. Correct disposal protects the environment
and prevents any possible harmful impacts on humans and the environment.
Check
Fault-free condition
Cable resistance in Ohms
Insulation resistance in MOhm

Before installation

17
After installation,
but before connection
of the power supply