Altrad Belle EASY SCREED PRO Manuel De L'opérateur page 10

GB
WARNING
How to assemble the Easy Screed Pro (See Image 1)
form screeder or as a free screeder.
CAUTION
Operation and use of the Easy Screed Pro.
freshly poured concrete surface.
CAUTION
concrete.
level, smooth and shining surface.
Easy Screed Pro on a dry, clean and stable surface.
7. If you do not expect to use the engine for a long period of time, drain the fuel tank and let the engine run at idle speed until the fuel
in the carburettor is used and the engine stops.
Beam Size Vibrator
(ft / mtr) Position
How to adjust the centrifugal force: (See Image 2)
NOTE:
HIGH RPM = Low Vibration Output / LOW RPM = High Vibration Output
The Clutch Engages at 4500rpm
Operating Instructions
Image 2
10
YOU MUST READ and STUDY
Image 1
5
ON-OFF switch is in the ON position.
1
2
3
4
6