Switching On And Setting The Thermometer; Setting The Basic Functions - Beurer medical FT 100 Mode D'emploi

7. switching on and setting the thermometer

To switch on the thermometer, briefly press the
After a brief self-test and two short beeps the thermometer is ready for forehead measurement. The device always
starts up in forehead temperature mode

setting the basic functions

Time format Date
This menu allows you to set the following functions individually, one after another.
• Insert the batteries or press and hold the LIGhT/sET button for 4 seconds
when the thermometer is switched on. The time format flashes on the dis-
play (Fig. 1).
• Use the MODE/MEM button to set your preferred time format, and confirm
with the LIGhT/sET button.
/ sCAN button.
.
Temperature
Time
measurement
unit
Acoustic
Illuminated
signal
32
display
AM
Fig. 1