Beurer medical FT 100 Mode D'emploi page 37

The measuring distance is
4-6 cm
Once the thermometer has detected
the correct measuring distance of 4
to 6 cm, the measurement starts auto-
matically. The fever/distance indica-
tor now lights up continuously in blue.
After a few seconds, the measurement
appears on the display (Fig. 12). The
end of the measurement is signalled
by a long beep.
If the measurement is less than 37.5°C (99.5°F), if the fever/distance indica-
tor lights up in green and if
this indicates that the body temperature is in the normal range.
If the measurement is between 37.5°C and 37.9°C, the fever/distance
indicator lights up yellow. This indicates that the body temperature is in
an increased range (Fig. 13).
If the measurement is more than 38°C (100.4°F), if the fever/distance indica-
tor lights up in red and if
that the body temperature is above the normal range.
The measurement is automatically saved with the date/time and the "fever"
/ "no fever" classification.
The device is ready to take another measurement when two short beeps sound
and the forehead symbol
The measuring distance is NOT
If the measuring distance is not 4 to
6 cm, the fever/distance indicator
flashes blue (the device also beeps if
the acoustic signal is switched on) and
4-6 appears on the display (Fig. 11). If
the correct measuring distance is not
found after 20 seconds, the measure-
ment ends automatically.
appears on the display to indicate no fever,
appears on the display (Fig. 14), this indicates
stops flashing.
37
4-6 cm
Fig. 11
Fig. 12
Fig. 13
Fig. 14