Beurer medical FT 100 Mode D'emploi page 33

The year flashes on the display (Fig. 2).
• Use the MODE/MEM button to set the year, and confirm with the LIGhT/
sET button.
The day/month flashes on the display (Fig. 3).
• Use the MODE/MEM button to set the day and month, and confirm with
the LIGhT/sET button.
If the hour format is set as 12 h, the day/month display sequence is
reversed. Be sure to set the date and time correctly. Otherwise, you will
not be able to save your measured values correctly with a date and time
and access them again later.
The hour flashes on the display (Fig. 4).
• Use the MODE/MEM button to set the hour, and confirm with the LIGhT/
sET button.
The minute flashes on the display (Fig. 5).
• Use the MODE/MEM button to set the minute, and confirm with the LIGhT/
sET button.
In the 12 h format, the time is displayed with AM/PM.
33
YEAR
Fig. 2
Fig. 3
Fig. 4 Fig. 5
DATE