Beurer medical FT 100 Mode D'emploi page 35

The illuminated display symbol flashes on the display (Fig. 8).
You can activate or deactivate the automatic illuminated display (appears fol-
lowing forehead temperature measurement).
• To activate the automatic illuminated display, use the MODE/MEM button
to select , and confirm with the LIGhT/sET button.
• To deactivate the automatic illuminated display, use the MODE/MEM button
to select , and confirm with the LIGhT/sET button.
You can also activate the illuminated display manually by briefly pressing the LIGhT/sET button.
The display lights up for 5 seconds.
The automatic and manual illuminated display cannot be used while measurement is in progress.
35
Fig. 8