Switching On And Setting The Thermometer; Setting The Basic Functions - Beurer medical FT 90 Mode D'emploi

7. Switching on and setting the thermometer

Briefly press the On/Off button
After a brief self-test and two short beeps the thermometer is ready for forehead measurement.
The device always starts up in forehead temperature mode

7.1 Setting the basic functions

This menu allows you to set the following functions individually, one after another.
Time format Date
• With the thermometer switched on, press and hold the LIGHT/SET button
for 5 seconds.
The time format option flashes on the display (fig. 1).
• Use the MODE/MEM button to set your preferred time format and confirm
with the LIGHT/SET button.
The year flashes in the display (fig. 2).
• Use the MODE/MEM button to set the year and confirm with the LIGHT/
SET button.
Day/month flashes in the display (fig. 3).
• Use the MODE/MEM button to set the day and month, and confirm with
the LIGHT/SET button.
In the 24h format, the date is displayed as day/month. In the 12h format, it
is displayed as month/day.
.
Temperature
Time
meas. unit
.
Acoustic Illuminated
signal
29
display
Fig. 1
Fig. 2 Fig. 3