Warnings And Safety Notes; Risks To The User - Beurer medical FT 100 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 44

3. Warnings and safety notes

3.1

Risks to the user

• Only use the device once you have read and understood these instructions for use.
• Retain these instructions for use. The instructions for use must be accessible to all users. All instructions must
be followed.
• The thermometer needs to be in the room in which the measurement is taken for at least 30 minutes before use.
• After physical activity, a bath or spending time outdoors, wait approx. 30 minutes before you take a measure-
ment on your forehead.
• The FT 100 thermometer is only designed for the measuring area on the human body stated in the instructions
for use.
• Measure your temperature regularly to obtain your normal average temperature. If you suspect you have a fever,
compare your normal average temperature with the temperature measured currently. Do not self-diagnose or
self-medicate on the basis of the measurements without consulting your doctor. In particular, do not start tak-
ing any new medication or change the type and/or dosage of any existing medication without prior approval.
• The device is only intended for the purpose stated in these instructions for use.
• The manufacturer is not liable for damage resulting from improper or careless use.
• Children must not be allowed to use the device. Medical devices are not toys.
• Check before each use that the lens is intact. If it is damaged, please contact your retailer or the service address.
• Do not touch the lens with your fingers.
• The measurements taken by you are for your information only – they are no substitute for a medical examina-
tion. Consult a doctor before you undertake any medical treatment.
• Clean the thermometer after each use (w  12. Cleaning the device).
• Should you have any questions about using the device, please contact either your retailer or Customer Services.
26

Publicité

Table des Matières
loading

Table des Matières