MRA 4025066156214 Instructions De Montage page 3

GB
Read this manual carefully and check the parts list for completeness before you begin. We recommend
Number
1 MRA screen
1 Brackets, 1 pair
4 Plastic washers, 12x5 mm
4 Oval head screws, black, M5x16 mm
4 Rubber nuts, M5
4 Allen screws, M6x20 mm
How to mount the screen on your motorbike:
1. Stand your motorbike up on a level surface.
2. Unscrew the two Allen screws (P1, see arrows) on the headlight.
Note that dismantling the Allen screws will loosen the headlight.
3. Insert one of the brackets included (11141) between the metal bracket and the
headlight bracket of the motorcycle, and insert the M6x20 mm Allen screws (10662)
into the holes. Tighten the screws only slightly.
4. Repeat the above on the other side of the headlight.
5. Insert the rubber nuts into the mounted brackets, then mount the MRA screen using
the M5x16 mm oval head screws (10554) and plastic washers (10641) included in the
packaging.
6. Line up the MRA screen on your motorbike and tighten all the screws up.
After installation, check that all of the screws are tight; tighten them up if necessary. Repeat this at
regular intervals. Clean the screen with water, neutral soap and a sponge. Do not use solvents, alcohol or
MRA-Klement GmbH Siemensstr. 6 D-79331 Teningen Tel.: +49 7663 93890 Email: info@mra.de
Thank you for buying a MRA Windshield.
that you have your screen fitted by an authorised workshop.
Article
spirits to clean the screen as they will damage it.
MO UN T IN G IN STR UC T ION S
Yamaha XSR700
Article No..
--- Allen keys, 3 and 6 mm
11141
10635
10554
10629
10662
3
Required tools