Xylem Lowara LSB Série Instructions De Montage page 98

Installation, Operation and Maintenance Instruction

Adjust the face on the impeller side of the mech.
seal exactly on measure A. For mech. seals
without own set screws the fixing ring (527)
serves as a stop.
Push mech. seals with bellows in such a way,
that the bellow is compressed and not stretched
(danger of tearing apart!).
LSB 100-english
Artikel Nr. 771076129
Use
between shaft sleeve and shaft only, if you are
sure that no dangerous reactions between
pumped liquid and anti-friction device can
occur.

Further assembly and installation of pump acc.
chapter
Maintenance Instruction.
Before starting the pump connect flushing
system for quench and put it into operation.
page 94
Model LSB
anti-friction device (Molykote,
8 of Installation,
etc.)
Operation and