Table des Matières
Publicité
8.2
MOUNTING THE REFRACTORY BRICKS
The base made in refractory material supplied already assembled, should be reviewed to verify if during transport the
components of the base have moved by creating an incorrect levelling which would not make it possible to proceed to the
assembly of the remaining refractory bricks.
8.2.1
To restore the levelling of the bases, shim where necessary the side and central bases by using the adhesive fibre
glass supplied. (Fig.5)
8.2.2
Insert the two lateral refractory bricks of the interior of the combustion chamber that have been delivered
separated from the heater by inserting them in the appropriate guides (Fig. 6)
FIG. 6
cod. 004777090 MBL - 19/12/2018 - Palazzetti - PN - Italy
FIG. 5
53
Publicité
Chapitres
Table des Matières
