Introduction; Intended Use; Depicted Components; Package Contents - Parkside PSBM 1100 B1 Traduction Des Instructions D'origine

2-SPEED HAMMER DRILL
PSBM 1100 B1

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

The appliance is suitable for:
▯ Impact-drilling into brickwork, concrete and
stone
▯ Drilling into stone, wood and metal
Any other usage or modification of the appliance
is deemed to be improper and carries a significant
risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse. The appliance is
not intended for commercial use.

Depicted components

Quick-release chuck
Teeth on the depth stop
Toggle button for the depth stop
Depth stop (not prefitted)
Function selector switch
Speed preselector wheel
Rotation direction switch
Locking button for ON/OFF switch
ON/OFF switch
Speed selector
Additional handle
│ GB │ IE
■ 2
Fig. A
Wing screw
Dust extractor
Dust extraction adapter
Reducer

Package contents

1 2-speed hammer drill
1 additional handle
1 quick-release chuck
1 dust extractor
1 depth stop
1 carrying case
1 set of operating instructions

Technical data

Rated power consumption
Rated voltage
Gearbox
Rated idle speed – 1st gear
Rated idle speed – 2nd gear n
Stroke rate – 1st gear
Stroke rate – 2nd gear
Max. torque
Chuck capacity
Max. drill diameter
Protection class
Noise emission value
Noise measurement value determined in accord-
ance with EN 62841. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
Wear hearing protection!
1100 W
230 V ∼, 50 Hz
(AC)
2-speed gearbox
n 0–900 rpm
0
0–3200 rpm
0
0–15300 rpm
0–54400 rpm
18 Nm
max. Ø 13 mm
13 mm for steel
40 mm for wood
16 mm for concrete
II /
(double insulation)
L = 92 dB (A)
pA
K = 5 dB
L = 103 dB (A)
WA
K = 5 dB
PSBM 1100 B1