Safety Instructions - IKA KS 4000 i control Mode D'emploi

Source language: German
Contents
EU Declaration of conformity
Warranty
Safety instructions
Correct use
Unpacking
Commissioning
Switching on
Setting the safety limit values
Opreator panel and display
Function Shaking
Timer
Function Heating
Operating modes
Setting the operating mode
External temperature sensor
Kalibration - temperature
Reset
Appliance variant KS 4000 ic control
Attachments
Error codes
Interface and outputs
Maintenance and cleaning
Accessories
Technical data
EN

Safety instructions

• Read the operating instructions completely before starting up and
follow the safety instructions.
• Keep the operating instructions in a place where it can be accessed by everyone.
Page
2
The media used in the appliance may result in danger specific to
2
the media and the process. This applies, for example, to shaking
15
cultures with living cells and to aggressive or flammable media.
17
Particulars as small estimated endangerments can become, if they
17
arise with one another in combination, a larger endangerment. This manual
17
cannot describe the dangers and resulting safety measures in more detail.
17
18
• This appliance should only be operated by suitably trained personnel familiar
18
with the appliance and authorized to work in this area.
18
• The machine may only be opened by trained specialists - even during repairs. The
18
machine is to be unplugged from the mains before opening. Live parts inside the
18
machine may still be live for some time after unplugging from the mains.
19
• NOTE ! Covering or parts that are capable of being removed from the unit
19
without accessory equipment have to be reattached to the unit for safe opera-
19
tion in order to prevent, for example, the ingress of fluids, foreign matter, etc.
19
• Wear your personal protective equipment in accordance with the hazard cate-
20
gory of the medium to be processed. There is a risk of:
20
- splashing liquids
21
- projectile parts
21
- body parts, hair, clothing and jewellery getting caught.
23
• Follow the safety instructions, guidelines, occupational health and safety and
25
accident prevention regulations.
27
• Beware of the high dead weight of the appliance when transporting. Ensure
27
that your fingers do not get crushed when setting down the appliance.
• Always install the appliance on a flat, stable non-slip base.
• Pay attention to the vessels on the shaking table when setting the shaking rate.
This will prevent any of the medium to be shaken from spurting out of the
sample vessels.
15