Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTRUCTIONS FOR USE
ISTRUZIONI PER L'USO
AIR IMPACT WRENCH USE AND CARE
• Do not subject the pneumatic tool to overpressure: only use it for its intended purposes.
• Check that the pneumatic tool is in good condition: make sure that no parts have been damaged.
Always check that the machine is intact.
• Always disconnect the air supply before fitting in tools or making adjustments; this precaution
will prevent the pneumatic tool from being accidentally started.
• Store idle pneumatic tools out of the reach of children. Do not allow persons unfamiliar with these
instructions to operate the pneumatic tool.
• Do not modify the pneumatic tool. This can reduce the effectiveness of safety measures and increase
operator risk.
• Have the pneumatic tool repaired only through a qualified repair person and only using original
replacement parts.
PERSONAL PROTECTIVE EQUIPMENT TO WEAR WHILE OPERATING PNEUMATIC TOOL
Failure to observe the following warnings may result in physical injury and/or disease.
TECHNICAL DATA
MEASURING RANGE
RESOLUTION
MAX. OPERATING PRESSURE
AIR HOSE LENGTH
INFLATOR HEIGHT
THREADED FITTING
SWIVEL AIR HOSE CONNECTION Ø
WEIGHT
KEY TO SYMBOLS
a: tyre valve connector
b: operation buttons + / -
c: swivel air connection Ø 7 mm
6
ALWAYS WEAR EYE PROTECTION WHILE OPERATING PNEUMATIC
TOOL OR PERFORMING MAINTENANCE JOBS
0.7 ÷ 12 bars
0.1 bars
15 bars
150 mm
245 mm
1/4" GAS
7 mm
810 g
EN
I
Publicité
Table des Matières
