Applications; Technical Data; Tool Description - Beta 3012C Mode D'emploi

INSTRUCTIONS FOR USE

APPLICATIONS

• Tool for holding the engine when removing it from the support to carry out jobs
on, for example:
- Timing belt
- Water pump
- Alternator
ADVANTAGES
• Applying the cross member takes just a few seconds, and the operator can fix
it under the vehicle unassisted, and then carry out all the jobs while standing
comfortably.
• 2 pairs of stabilizer pins (1 200mm-pair and 1 500mm-pair) making it possible to
work on cars as well as on vans and commercial vehicles.
• Loading belt allowing the cross member to be held steady, even when the under
body does not have any convenient hooking holes.

TECHNICAL DATA

Length: 1050 mm
Max. jack height : 260 mm
Max. capacity : 250 kg
Weight: 12 kg

TOOL DESCRIPTION

• Jack with hard buffer, instead of a movable support disk, to lean on the oil pan.
• Single hook central to the bar, for increased fixing safety.
• Hook fixed to the bar by means of a steel nut.
• Jack and stabilizer pin screws with trapezoidal thread, for enhanced strength.
• Belt with hook, for increased comfort (see sequences 1-2-3-4 on the right).
EN
1
2
3
4
5