Tunturi Cardio Fit Cross C30 Mode D'emploi page 6

below (set tension knob to max. level
to ease the cable connection) before
sliding the upright tube in position.
• Use the enclosed Allen key to tighten
the fastening screws, turning them
clockwise.
Remark:
First put all screws/ bolts in correct place
before tightening them fully.
Assembly step 3
• Fit upper moving handle bars as
shown in picture.
Remark:
First put all screws/ bolts in correct place
before tightening them fully.
6
Step 1
Step 2
Step 3
Assembly step 4
• Fix both fixed pedal tubes with the
both crank arms as shown in picture.
Remark:
Pedal posts are marked with
"L" and "R" label.
L = Left hand side pedal post
R = Right hand side pedal post.
Remark:
The pedal hinge bolts Left & Right are
marked L & R respectfully. The left hand
hinge bolt uses a Left Hand Thread.