Control Panel; Main Screen - Olimpia splendid Sherpa Aquadue S2 E Small Instructions Pour L'installation, L'emploi Et L'entretien

5 - CONTROL PANEL

The control panel, located on the front panel, is a visualization, configuration and control graphic display.
The interface is structured through a menu where you will find graphic symbols, icons and messages.
Press on the icons to access submenus in order to start heating and cooling, to configure water production,
to configure the heat pump, to access or enable a function, to track the operating status.
Some functions are only accessible to the installer, service or factory.
Access is allowed through a password which can be requested based on your own competence.

5.1 - MAIN SCREEN

P3
P2
P1
P1. Climatic curve enabled
P2. Production of domestic water in progress
P3. Active mode (standby, cooling, heating,
only domestic hot water)
P4.
Energy saving function
P5. Night function
P6. Error followed by the corresponding code
P13
P12
P11. System water temperature
P12. Timer active
P13. Holiday program
P14. Rating active
P15. Domestic water temperature
P16. Timer active
P17. Holiday program
P4 P5
P11 P14
i1 i2 i3
P6 P7
P7. Override followed by the corresponding
code (the override is not a malfunction
report)
P8. Address of the heat pump in case of
configuration of various units in cascade
mode
P9. Anti-Legionella function in progress
P10. Production of domestic water disabled
P15
i4 i5
i1.
Modes of operation menu
i2. Desired temperature setting
i3. System temperatures
i4. Timer menu
i5. Functions menu
P8
P9
P10
P17
P16
EN - 31
AQUADUE SMALL