Important - Olimpia splendid Sherpa Aquadue S2 E Small Instructions Pour L'installation, L'emploi Et L'entretien

Masquer les pouces Voir aussi pour Sherpa Aquadue S2 E Small:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

12. In case of replacement of parts, use only original OLIMPIA SPLENDID parts.

13. IMPORTANT!

To prevent any electrocution risk, it is essential to disconnect all the power
circuits before performing electrical connections and any cleaning and/or
maintenance operation on the appliances.
14. The installation of OLIMPIA SPLENDID appliances must be carried out by
an authorized company which, at the end of the work, releases to the plant
manager a declaration of conformity in accordance with the Standards
in force and with the indications supplied by OLIMPIA SPLENDID in this
manual.
15. Install the air-water heat pump respecting the instructions in this manual;
if the installation is not carried out correctly, the risk of water leakage,
electrical shock or fire may be present.
It is recommended to exclusively use the supplied components specifically
designed for installation; the use of components different from these may
result in water leakage, electrical shock or fire.
16. Once installation is complete, check that there's no leakage of refrigerant
(the refrigerating liquid, if exposed to a flame, produces toxic gas).
17. Upon installation or repositioning of the system, make sure that no
substances enter the refrigerating circuit, such as air, different from the
specified refrigerating liquid (the presence of air or other foreign substances
in the refrigerating circuit may cause a huge increase in pressure or
breakage of the system, with consequent damages to people).
18. In case water leakages, switch off the unit and stop the supplies of the
internal and external units by means of the main switches.
Call, as soon as possible, the Technical Assistance Service of OLIMPIA
SPLENDID or professionally qualified personnel and do not intervene
personally on the appliance.
19. If in the system there is a boiler, check, during operation of the latter, that
temperature of the water circulating inside the heat air-water pump does
not exceed 65°C.
20. This instruction manual is an integral part of the appliance and, accordingly,
it must be kept with care and will ALWAYS accompany the appliance even
in the case of its sale to another owner or user or in case of transfer to
another system. In case of damaging or loss, ask for a new one to your
local Technical Assistance Service of OLIMPIA SPLENDID.
21. Make sure the ground connection is carried out; do not ground the
appliance on distribution pipes, overvoltage arresters or on the ground of
the telephone system; if not performed correctly, the ground connection
may result in electrical shock; momentary high-intensity power surges
caused by lightings or other causes may damage the air-water heat pump.
EN - 6

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sherpa s2Sherpa aquadue tower s2

Table des Matières