Table des Matières
Publicité
Mode
Button
Manu
—
Manu
R
Manu
L
*
Auto
*
Auto
*
Auto
*
Auto
Set value interruption: Actuator moves to 4mA (2V) end position
Manu
SET+R
Setting up set value range 0...20mA (0...10V)
Manu
SET+L
Setting up set value range 4...20mA (2...10V)
Manu
SET
Legend: * independent,
off,
Remark: When changing the controller the new controller must run through a rotating direction indication once. Therefore hold down the SET button in MANU mode and engage operating voltage. The
actuator moves automatically and runs through the rotating direction indication.
36
Function
—
Rotate actuator right
Rotate actuator left
Actuator rotates right
Actuator rotates left
—
Engaging operating voltage with pressed button
Rotating direction detection:
Actuator rotates momentary right
on,
flashing — In mode "Auto" buttons SET/L/R are generally without function
LED indication for PMR-NK
At operating voltage
Set value
*
*
*
CW set value, approaching set value position
CCW set value, approaching set value position
At set value, set value position reached
I Set < 4mA (U Set <2V) -›only in mode 4...20mA (2...10V)
*
*
*
yellow
green
blue
3x ,
then
3x ,
then
first ,
first ,
then
then 3x ,
then
Baureihe NK
red
Publicité
Table des Matières
