Table Des Matières; Symbols; General Safety Instructions - Festool C 12 Li Guide D'utilisation

Contents
Symbols ..................................
Safety instructions ....................
Technical data ..........................
Functional description ...............
Intended use ...........................
Operation ................................
Settings ..................................
Tool holder, attachments............
Working with the machine..........
Service and maintenance...........
Accessories..............................
Disposal ..................................
Transport.................................
Warranty .................................

General safety instructions

WARNING! Read all safety warn-
ings and all instructions. Failure to
follow the warnings and instructions may re-
sult in electric shock, fire and/or serious in-
jury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
1 WORK AREA SAFETY
a)Keep work area clean and well lit. Clut-
tered and dark areas invite accidents.
b)Do not operate power tools in explo-
sive atmospheres, such as in the pres-
ence of flammable liquids, gases or
dust. Power tools create sparks which may
ignite the dust or fumes.
c)Keep children and bystanders away
while operating a power tool. Distrac-
tions can cause you to lose control.
6
6
6
V
8
A
9
Hz
9
~
10
n
0
11
11
rpm revolutions per minute
13
14
14
15
15
15
Safety instructions
2 ELECTRICAL SAFETY
a)Power tool plugs must match the out-
let. Never modify the plug in any way.
Do not use any adapter plugs with
earthed (grounded) power tools. Un-
modified plugs and matching outlets will
reduce risk of electric shock.
b)Avoid body contact with earthed or
grounded surfaces, such as pipes, ra-
diators,
There is an increased risk of electric shock
if your body is earthed or grounded.
c)Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric shock.
d)Do not abuse the cord. Never use the
cord for carrying, pulling or unplug-
ging the power tool. Keep cord away
from heat, oil, sharp edges or moving
parts. Damaged or entangled cords in-
crease the risk of electric shock.
e)When operating a power tool out-
doors, use an extension cord suitable
for outdoor use. Use of a cord suitable for

Symbols

volts
amperes
hertz
alternating current
no load speed
Class II Construction
diameter
tip, hint
Warning of general danger
Risk of electric shock
Read the Operating
Notes!
Wear ear protection.
Wear protective gloves.
ranges and
Instructions/
refrigerators.