Maintenance And Cleaning; Troubleshooting - Argos Technologies FlexiRoll R1000 Manuel De L'opérateur

Maintenance & Cleaning
• No lubrication is required.
• Before cleaning be sure to unplug the power cord from the wall socket.
• The housing can be cleaned using a soft damp cloth and mild non-corrosive detergent.
• After cleaning, ensure that all parts are thoroughly dry before attempting to operate
the unit.
• Do not immerse the FlexiRoll in liquid.

Troubleshooting

Error
Unit does not start
No Display
LED Light On; unit not
working
Non-responsive Keypad
Argos Technologies FlexiRoll
Cause
Power cable not
connected.
Power Supply.
Remote Control.
Sample Overload.
Power Failure.
Timer cycle completed.
Overloaded.
Remote digital controller
has been connected.
10
™ — Operator's Manual
Solution
Check that power cable
is firmly plugged into wall
outlet.
Check that there is
power to the wall outlet.
Check that cable is
correctly installed into
the unit.
Ensure total weight does
not exceed 6.5Kg.
Ensure unit is
powered on.
Repeat run.
Check and repeat run.
Detach remote digital
controller from unit.