Maintenance / Cleaning - Argos Technologies RotoFlex R2000 Manuel De L'utilisateur

Argos Technologies RotoFlex
Maintenance & Cleaning
• No lubrication is required.
• Before cleaning be sure to unplug the power cord from the wall socket.
• Remove the rotisseries.
• The housing can be cleaned using a soft damp cloth and a mild non-corrosive
detergent.
• After cleaning, ensure that all parts are thoroughly dry before attempting to operate the
unit.
• Do not immerse the RotoFlex in liquid.
• Not to be used to mix flammable samples.
• Avoid aggressive solvents or vapors.
• Take appropriate precautions when mixing hazordous samples.
Troubleshooting
Error
Unit does not start Power cable not
If suggested solutions are unsuccesful, please contact Argos Technologies
Technical Support at
Argos Technologies
800-886-8675 (Inside U.S.)
847-622-0454 (Outside U.S.)
www.argos-tech.com
Tube Rotator — Operator's Manual
™
Warnings
Cause
connected
Power Supply
Power Switch
5
Solution
Check that power cable
is firmly plugged into
wall outlet.
Check that there is
power to the wall outlet.
Check that power switch
is at ON status.