Installation For Stacked Units - Argos Technologies FlexiRoll R1000 Manuel De L'opérateur

Agitateur à rouleaux pour cultures cellulaires, qui peut s'utiliser avec une variété de bouteilles, tubes et flacons

Table des Matières

Les langues disponibles

Installation for Stacked Units

Two FlexiRoll units may be stacked to maximize limited space in incubators on the

laboratory bench.

Note: Stainless steel stacking rods must be purchased separately.

1. Unscrew the hexagonal screw on the bottom of the unit (Figure-3) until you are

able to slide out the support base from the unit housing (Figure-4). Retighten the

hexagonal screw to lock in place (wrench provided).

2. Repeat step #1 until all four support bases are extended and locked in position.

3. Insert stacking rod into the bottom support base and secure with the screw

provided (Figure-5).

4. Repeat step #3 on the other stacking rods, securing in the same manner.

5. On the second FlexiRoll unit, repeat steps 1 & 2 to expose the support bases from

the unit housing.

Argos Technologies FlexiRoll

Figure 3

™

— Operator's Manual

Figure 4

Figure 5

Table des Matières

Table des Matières

Flexirollr1000e