Installation - Argos Technologies FlexiRoll R1000 Manuel De L'opérateur

Argos Technologies FlexiRoll

Installation

The Argos FlexiRoll is delivered completely assembled and requires no additional set
up. To accommodate the different size bottles, flasks and tubes, the cell rollers can be
removed or added depending on application.
1. Twist the round securing knob counter-clockwise until it becomes loose. It does
not need to be removed entirely. (Figure-1)
2. Lift up the metal retaining strip which will allow you to remove one or more of
the cell rollers.
3. To install the cell rollers, follow instructions 1 & 2 above to lift the top of the
retaining strip. Align the hexagon shaped hole at the end of the cell roller so that it
can insert into the corresponding hexagonal shaft located on the base unit housing
(Figure-2). Lay the other end of the roller in the semi circular opening on the
bottom half of the retaining strip.
4. Lower the top half of the retaining strip and twist the round screwing knob
clockwise to secure the retaining strip and cell rollers.
™ — Operator's Manual
5
Figure 1
Figure 2