Technical Data; Charging The Battery; Inserting The Battery - Hilti SID 8-A22 Notice D'utilisation Originale

4

Technical data

4.1 Impact screwdriver
Rated voltage
Weight including battery B22⁄8.0
Rated speed under no load
Torque
Storage temperature
Ambient temperature for operation
4.2 Battery
Battery operating voltage
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
5 Preparations at the workplace
CAUTION
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or
before changing accessories.
Observe the safety instructions and warnings in this documentation and on
the product.

5.1 Charging the battery

1. Before charging the battery, read the operating instructions for the
charger.
2. Make sure that the contacts on the battery and the contacts on the
charger are clean and dry.
3. Use an approved charger to charge the battery.

5.2 Inserting the battery

CAUTION
Risk of injury by short circuit or falling battery!
▶ Before inserting the battery, make sure that the contacts on the battery
and the contacts on the product are free of foreign matter.
▶ Make sure that the battery always engages correctly.
1. Charge the battery fully before using it for the first time.
*2153706*
Printed: 14.10.2019 | Doc-Nr: PUB / 5293229 / 000 / 02
2153706
21.6 V
DC
8.2 lb
2,200 /min
369 ftlb
f
−4 ℉ ... 158 ℉
1 ℉ ... 140 ℉
21.6 V
1 ℉ ... 140 ℉
−4 ℉ ... 104 ℉
14 ℉ ... 113 ℉
English 9