Horizon Fitness CE4.3 Manuel Du Propriétaire page 9

TOOLS INCLUDED:
5 mm Allen Wrench
6 mm Allen Wrench
13/15 mm Flat Wrench
Screwdriver
PARTS INCLUDED:
1 Console
1 Console Mast
1 Front Stabilizer Tube
2 Upper Handlebars
2 Lower Handlebars
2 Lower Link Arms
1 Top Front Cover
1 Top Rear Cover
2 Rear Stabilizer End Caps
2 Elbow Cover Sets
2 Handle Bar Cover Sets
1 Water Bottle Holder
1 Console Mast Boot
1 Hardware Kit
1 Audio Adapter Cable
1 Power Adapter
PRE ASSEMBLY
UNPACKING
Unpack the product where you will be using it. Place the elliptical carton on a level flat
surface. It is recommended that you place a protective covering on your floor. Never
open box when it is on its side.
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and
partially threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any grease,
such as lithium bike grease is recommended.
NEED HELP?
If you have questions or if
there are any missing parts,
contact Customer Tech
Support. Contact information
is located on the back panel
of this manual.
9