Horizon Fitness CE4.3 Manuel Du Propriétaire page 10

ASSEMBLY STEP 1
REAR STABILIZER
END CAP
10
BOLT (A)
SPRING WASHER (B)
END CAP
FLAT WASHER (C)
MAIN FRAME
A
FRONT STABILIZER TUBE
B
C
HARDWARE FOR STEP 1:
BOLT (A)
20 mm
Qty: 2
SPRING WASHER (B)
18 mm
Qty: 2
FLAT WASHER (C)
20 mm
Qty: 2
Open HARDWARE BAG FOR
STEP 1.
Attach the FRONT STABILIZER
TUBE to the MAIN FRAME
using 2 BOLTS (A), 2 SPRING
WASHERS (B) and 2 FLAT
WASHERS (C).
Fit both END CAPS into REAR
STABILIZER TUBE.