Electrical Safety; Personal Safety - Ryobi RM480e Traduction Des Instructions Originales

Safety, performance, and dependability have
been given top priority in the design of your
ride-on mower.
INTENDED USE
The ride-on mower is intended for outdoor use
only.
The product is designed for domestic lawn
mowing. The cutting blade should rotate
approximately parallel to the ground over
which it is being wheeled. All four wheels
should touch the ground while mowing.
The product is to be used only in domestic
application by adults who have received
adequate training on the hazards and
preventive measures or actions taken while
using it.
Do not use the product for any other purpose.
GENERAL SAFETY WARNINGS
WARNING
Read all safety warnings, instructions,
illustrations and specifi cations provided
with this power tool. Failure to follow
all instructions listed below may result in
electric shock, fi re, and/or serious injury.
Save all warnings and instruction for
future reference.
The term "power tool'' in the warnings refers
to your mains-operated (corded) product or
battery-operated (cordless) product.
WORK AREA SAFETY
■ Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
■ Do not operate power tools in explosive
atmospheres, such as in the presence
of flammable liquids, gases or dust.
Power tools create sparks which may ignite
the dust or fumes.
■ Keep children and bystanders away
while operating a power tool. Distractions
can cause you to lose control.

ELECTRICAL SAFETY

■ Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified
plugs and matching outlets will reduce risk
of electric shock.
■ Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock
if your body is earthed or grounded.
■ Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
■ Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.
■ When operating a power tool outdoors,
use an extension cord suitable for
outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric
shock.
■ If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric
shock.

PERSONAL SAFETY

■ Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment
of inattention while operating power tools
may result in serious personal injury.
■ Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid
safety shoes, hard hat or hearing protection
used for appropriate conditions will reduce
personal injuries.
■ Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying the
tool. Carrying power tools with your finger
on the switch or energising power tools that
have the switch on invites accidents.
■ Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating
part of the power tool may result in personal
injury.
EN
FR
DE
DA
SV
FI
NO
English | 1