Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Keep hands and feet away
from the blade and cutting
area.
Brake
Step on the brake pedal to stop
the product.
Parking brake
Accelerate
Step on the accelerator pedal
to move forward or backward.
Charging port
0 ~ 40°C
< 0°C
Conforms to all regulatory
standards in the country in
the EU where the product is
purchased
EurAsian Conformity Mark
The product can be operated
in reverse with blades
engaged when RMO button
is pushed and red button
light is on. Always look down
and behind you before and
when manuevering in reverse.
Mowing in reverse is not
recommended.
Lift the blade engagement
button up to engage. Press the
blade engagement button down
to disengage.
Cruise control allows the
product to remain at a constant
speed without the operator
having to maintain pressure on
the accelerator pedal.
Refer to the "Setting the cruise
control" section.
Waste electrical products
should not be disposed of
with household waste. Please
recycle where facilities exist.
Check with your local authority
or retailer for recycling advice.
Ukrainian mark of conformity
For indoor use only
Time-lag fuse type
To reduce the risk of injury,
user must read and understand
user's manual before using this
product.
Burst hazard
To reduce the risk of injury or
damage, avoid contact with any
hot surface.
Failure to use in dry conditions
and to observe safe practices
can result in electric shock.
Electric shock hazard.
Always unplug the charger
from the power supply before
connecting to or disconnecting
from the battery.
Do not expose to rain or use in
damp locations.
Do not expose to rain or use in
damp condition.
Keep away from all sources of
ignition, sparks, and fl ames.
Do not cover any ventilation
slots, and provide adequate
ventilation during operation.
Keep out of the reach
of children or untrained
individuals.
English |
EN
FR
DE
DA
SV
FI
NO
9
Publicité
Table des Matières
