Changing The Basic Settings - NEFF T1 D41 Série Mode D'emploi

Display Function
Energy consumption display(Ask your electricity supply company what the mains voltage is)
™„
‹ Consumption display switched off.*
Consumption display with mains voltage at 230 V.
‚
Consumption display with mains voltage at 400 V.
ƒ
Consumption display with mains voltage at 220 V.
„
Consumption display with mains voltage at 240 V.
...
™† Automatic timer
‹ Switched off.*
- Cooking time, after which the hotplates switch off
‚ ŠŠ
Duration of the timer end signal
™‡
10 seconds.
‚
ƒ n 30 seconds
1 minute.*
„
Activation of the filament circuits
™ˆ
Switched off.*
‹
‚ Switched on.
Last setting before the hotplate was switched off.
ƒ
Time for selecting the hotplate
™Š
Unlimited: The last selected hotplate can always be adjusted without having to select it again.*
‹
‚ Once you select a hotplate, you have 10 seconds to adjust it, after which you will have to select it again in order to
be able to adjust it.
Reset to basic setting
™‹
‹ Switched off.*
Switched on.
‚
* Basic setting

Changing the basic settings

The hob must be switched off.
Switch on the hob.
1.
Within the next 10 seconds, press and hold the
2.
4 seconds
and flash alternately in the left-hand display and
™ ‚
in the right-hand display.
Touch the symbol repeatedly until the desired indicator
"
3.
appears in the left-hand display.
Touch the + or - symbol repeatedly until the desired setting
4.
appears in the display.
symbol for
"
Touch the
5.
The setting is activated.
Switching off
To exit the basic setting, switch off the hob with the main switch
and make new settings.
lights up
‹
" symbol for 4 seconds.
33