Clarke Focus 28” Disc iDrive Manuel D'utilisation page 29

Maintenance
3. Using the joystick, position the front wheel
straight by doing one of the following:
a) Using black indicator marks on steering
system, realign front wheel (see figure 44).
b) Place front wheel straight by visually
estimating it's position (see figure 45).
4. Hold joystick in corrected position and
connect black wires together and key off the
machine (see figure 46).
5. Disconnect black wires.
6. Key machine on. If machine drives straight,
then proceed to step 7. If not, then repeat
steps 2-5.
7. Replace foot plate and screws.
8. Key machine on.
Clarke ®
Operator's Manual (EN) - Focus Rider
ENGLISH EN
Figure 44
Figure 45
Figure 46
- 29 -