Remaining Hazards; Machine Specifications; Machine Description; Technical Data - Jet JWS-34KX Mode D'emploi

Make all machine adjustments or maintenance with the
machine unplugged from the power source.

3.3 Remaining hazards

When using the machine according to regulations some
remaining hazards may still exist.
Touching the cutting tool in the machining area can cause
injury. For effective protection the shaper guard must always
be adapted to the workpiece and to the machining operation.
Risk of kickback. The workpiece is caught by the rotating
cutter and thrown back to the operator.
Thrown workpiece parts can lead to injury.
Sawdust and noise can be health hazards.
Be sure to wear personal protection gear such as safety
goggles and ear protection. Use a suitable dust exhaust
system.
The use of incorrect mains supply or a damaged power cord
can lead to injuries caused by electricity.

4. Machine specifications

4.1 Machine description

A Shaper guard lock
B Shaper fence
C Fence boards
D Mitre gauge
E...Spindle rotation lock
F...Spindle up/down lock
G Speed select viewing window
H Motor/pulley access door
I...Spindle up/down scale
J...Spindle up/down handwheel
K ON/OFF main switch
L Shaper guard, lateral hold down
M Shaper guard, vertical hold down
Fig 1
N Fence attachment knobs
O Fence board offset scale
P Fence board lock
Q Fence board offset lock
R Fence board offset adjust knob
S Dust port
T Fence cover lock knob

4.2 Technical data

No-load spindle speed n
o
1700/3500/6000/8000 rpm
Table size
Table height
Spindle diameter
Clamped height
Spindle travel
Router bit collet size
Table opening diameter
Max. tool diameter
Max. tool height above table
dust port diameter
Dimemsions LxWxH
Weight
Mains
Output power
Reference current
Extension cord (H07RN-F):
Installation fuse protection
Mains
Output power
Reference current
Extension cord (H07RN-F)
Installation fuse protection

4.3 Noise emission

Determined according to EN 848-1.
(Inspection tolerance 4 dB)
Workpiece pine wood:
W=100mm, L=1000mm, moisture 8,5%
Fig 2
635 x 600 mm
830mm
30mm
70mm
80mm
8 and12mm
160mm
180mm
120mm
100mm
920x680x1090mm
156 kg
230V ~1/N/PE 50Hz
1,5 kW (2 HP) S1
10 A
3x1,5mm²
16A
400V ~3/PE 50Hz
2.2 kW (3 HP) S1
5 A
4x1,5mm²
16A