Connecting The Refrigerator - Dometic CD0050 Instructions De Montage

Installing and connecting the refrigerator
7.2 Undo the lock
A
NOTICE!
Only adjust the locking mechanism when the drawer is open. The unit
will be damaged if this is adjusted when the drawer is closed.
The refrigerator has a locking mechanism (fig. 6 1, page 5) which is also used to
protect it during transport. The following settings are possible:
• Lock (turn wheel clockwise all the way): The drawer is locked and secured.
To open the drawer, lift the handle up and lift the drawer out.
• Vent (turn wheel anti-clockwise all the way): The drawer is slightly open, but
fixed in position.
Use this position if you are not going to use the unit for a long time.
7.3

Connecting the refrigerator

Connect the refrigerator to DC power
The refrigerator can be operated with 12 Vg or with 24 Vg.
A
NOTICE!
To avoid voltage drops and loss of performance, keep the cable as short
as possible and avoid joins.
For this reason avoid additional switches, plugs or multi-way adapters.
➤ Determine the required cross section of the cable in relation to the cable length
according to fig. 7, page 5.
Key for fig. 7, page 5
Co-ordinate axis
l
∅
A
NOTICE!
Make sure that the polarity is correct.
➤ Before starting up the appliance for the first time, check whether the operating
voltage and the battery voltage match (see type plate).
16
Explanation
Cable length
Cable cross section
CD0050, CRD1050
Unit
m
mm²
EN