Using The Refrigerator; Energy Saving Tips - Dometic CD0050 Instructions De Montage

Using the refrigerator

Proceed as follows when you connect the refrigerator to the AC supply:
➤ Fix the rectifier as shown in the location foreseen, behind the refrigerator (fig. 9,
page 6).
➤ Protect the AC circuit using a slow-blow fuse (250 V/4 A).
➤ Connect the power cable to the AC power supply.
➤ Plug in the connecting cable to the AC socket (fig. 9 1,page 6).
Proceed as follows when you connect the refrigerator to a DC supply when a rectifier
is fitted:
➤ Connect the loose DC cable (fig. 9 2, page 6) to the battery:
– Red cable: positive battery terminal
– Black cable: negative battery terminal
8 Using the refrigerator
I
NOTE
Before starting your new refrigerator for the first time, you should clean
it inside and outside with a damp cloth for hygienic reasons (please also
refer to the chapter "Cleaning and care" on page 22).
8.1

Energy saving tips

• Choose a well ventilated installation location which is protected against direct
sunlight.
• Allow warm food to cool down first before placing it in the cooling device to
keep cool.
• Do not open the cooling device more often than necessary.
• Do not leave the cooling device open for longer than necessary.
• Defrost your refrigerator as soon as a layer of ice forms.
• Avoid unnecessarily low temperature settings.
• Clean dust and dirt from the condenser at regular intervals.
18
CD0050, CRD1050
EN