Control Elements; Installing And Connecting The Refrigerator - Dometic CD0050 Instructions De Montage

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installing and connecting the refrigerator

6.2

Control elements

No. in
fig. 2, page 3
1
2
3
4
7
Installing and connecting the
refrigerator
Please note the following instructions for installation on boats:
D
DANGER!
If the appliance is powered by the mains, ensure that the power supply
has a residual current circuit breaker.
A
NOTICE! Safety instructions for installation on boats
• The device can be tilted sideways up to 30°. When setting up the
refrigerator, note that it must be fastened to take account of this. If
you have any questions regarding installation, consult your specialist
dealer.
• Install the refrigerator so that the warm air produced can easily flow
away (either upwards or to the sides, fig. 3, page 4).
• Observe all the other installation instructions in this section.
7.1
Installing the refrigerator
A
NOTICE!
• Fasten the device as described in the operating manual to prevent
hazards.
• Keep objects clear of openings in the housing or mounting structure
(such as ventilation slots).
• The refrigerator is only suitable for installation in a fitted niche. Once
it is installed, only the front of the appliance may be accessible.
14
Explanation
Temperature controller
Green LED: operation
Red LED: fault
Interior lighting
CD0050, CRD1050
EN

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Cd1050Coolmatic cd sérieCoolmatic cr sérieCoolmatic cd0050Coolmatic crd1050Cd série ... Afficher tout

Table des Matières