Using The Cooler - Dometic COOLFREEZE CF80 Notice D'utilisation

Masquer les pouces Voir aussi pour COOLFREEZE CF80:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operation
6.5

Using the cooler

A
NOTICE! Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the heat that
generated during operation can dissipate. Ensure that the ventilation
slots are not covered. Make sure that the device is sufficiently far away
from walls and other objects so that the air can circulate.
➤ Place the cooler on a firm foundation.
Make sure that the ventilation slots are not covered and that the heated air can
dissipate.
➤ Close the cooler, see chapter "Connecting the cooler" on page 13.
I
NOTE
If you wish to operate the cooler from the AC mains, set the battery
monitor to the "LOW" position.
A
NOTICE! Danger from excessively low temperature!
Ensure that the only those objects are placed in the cooler that are
intended to be cooled at the selected temperature.
➤ Press the "ON/OFF" button (fig. 2 1, page 3) for between one and two
seconds.
✓ The "POWER" LED lights up.
✓ The display (fig. 2 5, page 3) switches on and shows the current cooling
temperature.
I
NOTE
The temperature displayed is that of the middle of the interior.
The temperatures elsewhere can deviate from this temperature.
✓ The cooler starts cooling the interior.
I
NOTE
When operating with the battery, the display switches off automatically
if the battery voltage is low. The LED "POWER" flashes orange.
16
CoolFreeze
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Coolfreeze cf110

Table des Matières