Using The Cooler - Dometic CF35 Notice D'utilisation

CF35, CF40, CF50
I
NOTE
When the cooler is supplied by the starter battery, select the battery
monitor mode "HIGH". If the cooler is connected to a supply battery,
the battery monitor mode "LOW" will suffice.
If you wish to operate the cooler from the AC mains, set the battery
monitor to the "LOW" position.
6.5

Using the cooler

A
NOTICE! Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the heat that
generated during operation can dissipate. Ensure that the ventilation
slots are not covered. Make sure that the device is sufficiently far away
from walls and other objects so that the air can circulate.
➤ Place the cooler on a firm foundation.
Make sure that the ventilation slots are not covered and that the heated air can
dissipate.
I
NOTE
Place the cooler as shown (fig. 1, page 3).If you operate the box in a
different position it can be damaged.
➤ Close the cooler, see chapter "Connecting the cooler" on page 13.
I
NOTE
If you wish to operate the cooler from the AC mains, set the battery
monitor to the "LOW" position.
A
NOTICE! Danger from excessively low temperature!
Ensure that the only those objects are placed in the cooler that are
intended to be cooled at the selected temperature.
➤ Press the "ON/OFF" button (fig. 3 1, page 3) for between one and two
seconds.
✓ The "POWER" LED lights up.
✓ The display (fig. 3 5, page 3) switches on and shows the current cooling
temperature.
EN
All manuals and user guides at all-guides.com
Operation
15