Operation
• Do not open the cooling device more often than necessary.
• Do not leave the cooling device open for longer than necessary.
• If the cooler has a basket: For optimal energy consumption, position the basket
according to its position on delivery.
• On a regularly basis, make sure the lid seal still fits properly.
6.2
Using the cooler
➤ Place the cooler on a firm base.
➤ Connect the 12 V connection cable (fig. 2 1, page 3) into the cigarette lighter
socket or a 12 V socket in the vehicle.
➤ Plug the 230 V connection cable (fig. 2 2, page 3) into the AC voltage socket
and connect it to the 230 Vw mains supply.
I
NOTE
Close the box tightly by pushing down the lid.
✔ The cooler starts cooling the interior.
➤ When operating at the AC mains supply: Push the ECO cooling capacity
control (fig. 1 2, page 3) to the desired position.
➤ To switch off the cooler, disconnect the plug.
To avoid food waste, note the following:
• Keep temperature fluctuation as low as possible. Only open the cooling box as
often and for as long as necessary. Store the foodstuff in such a way that the air
can still circulate well.
• Adjust the temperature to the quantity and type of the foodstuff.
• Foodstuff can easily absorb or release odor or taste. Always store foodstuff
covered or in closed containers/bottles.
6.3
Connecting to a cigarette lighter
I
NOTE
If you connect the device to the cigarette lighter of your vehicle,
remember that the ignition must be turned on to supply the device with
power.
12
SinePower
EN