Energy Saving Tips; Connecting The Cooler - Dometic COOLFREEZE CF80 Notice D'utilisation

CoolFreeze
6.2

Energy saving tips

• Choose a well ventilated installation location which is protected from direct
sunlight.
• Allow hot food to cool down first before you place it into the device.
• Do not open the cooler more often than necessary.
• Do not leave the lid open for longer than necessary.
• Defrost the cooler once a layer of ice forms.
• Avoid unnecessary low temperatures.
6.3

Connecting the cooler

Connecting to a battery (Vehicle or boat)
The cooler can be operated with 12 V or 24 V
A
NOTICE! Danger of damaging the device!
Disconnect the cooler and other consumer units from the battery before
you connect the battery to a quick charging device.
Overvoltage can damage the electronics of the device.
For safety reasons the cooler is equipped with an electronic system to prevent the
polarity reversal. This protects the cooler against short-circuiting when connecting to
a battery.
A
NOTICE! Danger of damaging the device!
To avoid drops in voltage and therefore performance, keep the cable as
short as possible and only disconnect it when necessary.
For this reason avoid additional switches, plugs or power strips.
➤ Determine the required cross section of the cable in relation to the cable length
according to fig. 6, page 5.
Key for fig. 6, page 5
Co-ordinate axis
l
∅
EN
Meaning
Cable length
Cable cross section
g
.
Operation
Unit
m
mm²
13