Using The Cooler; Setting The Temperature - Dometic COOLFREEZE CDF16 Notice D'utilisation

All manuals and user guides at all-guides.com
Operation
6.5

Using the cooler

A
NOTICE! Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the heat that
generated during operation can dissipate. Ensure that the ventilation
slots are not covered. Make sure that the device is sufficiently far away
from walls and other objects so that the air can circulate.
➤ Place the cooler on a firm foundation.
Make sure that the ventilation slots are not covered and that the heated air can
dissipate.
➤ Press the "ON/OFF" button for three seconds.
✓ The "POWER" LED lights up.
✓ The display switches on and shows the current cooling temperature.
✓ The cooler starts cooling the interior.
A
NOTICE! Danger from excessively low temperature!
Ensure that the only those objects are placed in the cooler that are
intended to be cooled at the selected temperature.
I
NOTE
The temperature displayed is that of the middle of the interior.
The temperatures elsewhere can deviate from this temperature.
6.6

Setting the temperature

➤ Press the "SET" button once.
➤ Use the "UP +" and "DOWN –" buttons to select the cooling temperature.
✓ The cooling temperature appears in the display for a few seconds. The display
flashes several times and then the current temperature is displayed again.
12
CoolFreeze CDF16
EN