Installation; General Instructions; Warnings; Introduction - Fulgor Milano FBC 4500 TF Instructions Pour L'installation Et L'utilisation

1. INSTALLATIONN

1.1 General instructions

This manual contains instructions about
installation, use and safety. Read these
instructions carefully.
Store this manual for future reference
and keep it with the appliance if sold.
During

installation,

transport, rest the appliance base on a
lat surface, avoiding inclined positions
for prolonged periods.
The appliance cannot be used by children
or persons with reduced physical,
sensory or mental capabilities or lack of
experience or knowledge, without the
supervision of an adult or a tutor.
Children must not play with the appliance.
User cleaning and maintenance must not
be performed by unsupervised children.
The power cable and the plug must
be accessible when the appliance is
installed. The cable must not be bent or
squashed as this may compromise the
insulation.
Once the installation is complete the
ventilation outlets must not be obstructed.
All electrical parts as well as the parts
of the cooling circuit must be checked
regularly by authorized
personnel.
The manufacturer is not responsible
for damage due to incorrect operation,
improper use, or as a consequence of
unauthorized repairs or modiications.
handling and
technical
3 3

1.2 Warnings

This manual is an integral part of the product
and provides all the necessary information
for proper installation and maintenance of
the machine.
It is mandatory that the user and the installer
read this manual carefully and always
refer to it; it must be kept in a well-known
place, accessible to all authorized operators
(installer, user, maintainer).
The manual must be kept in a dry place.
The manufacturer declines all responsibility
and obligations for any damage to the
appliance, people and property, that may be
attributable to:
• incorrect installation and/or failure to
comply with applicable laws;
• modiications or improper maintenance;
• use of non-genuine spare parts or spare
parts not suitable for the model;
• total or partial non-compliance with the
instructions in this manual;
• non-compliance with safety instructions
and applicable laws during installation.

1.3 Introduction

The installation must be performed only
by authorized and qualiied personnel,
observing the warnings, instructions
and requirements contained in this
document.
Before installing the appliance ensure that
the existing electrical systems comply with
the law and correspond to the data on the
appliance label to be installed in terms of
voltage [V], frequency [Hz] and input power
[W].
The manufacturer of this equipment declares
the conformity of each appliance with the
regulations in force.
GB