Dialling Mode (Tone/Pulse) Setting; Ringer Volume Setting - Geemarc CL320 Notice D'utilisation

Dialling Mode (Tone/Pulse) Settings
In the UK, all telephone exchanges now use Tone dialing. If your
phone does not dial out, it is probably being used from an older
private switchboard (PBX). In this case, the Tone/Pulse setting must
be changed to Pulse.
Use
Use or

Ringer Volume Setting

A switch located on the right side of the CL320 unit allows the ringer
to be switched to LOW, MEDIUM or HIGH.
SETTINGS
MENU
Press
or to select
OK
Press to select
to select the desired method,
PULSE
OK
Press to select
Press to exit
16
TONE/PULSE
TONE or