Caller Display - Geemarc CL320 Notice D'utilisation

The features described in this section are only available if you
subscribe to a Caller Display service from your network provider.
Caller Display means you can see who is calling before you answer
a call or see who has called in your absence (provided the number is
not withheld, unavailable or is an international call). If the number is
stored in the phonebook, the caller's name is also displayed
Whether you take a call or not, the caller's details are stored in the
Call log. The call log stores the incoming calls. When the call log
memory is full, a new call will take the place of the oldest call. You
can display, scroll through and dial numbers in the log. The
sequence number is shown in the top right-hand side of the LCD
display.
If the caller has exercised the option to prevent his number from
being displayed,
someone is calling from an area where the service provider is not
offering the Caller display services or an area which is not providing
name and number delivery to your area via the long distance
OUT OF AREA
network,
a telephone number has not been seen previously,
displayed on the LCD display. If several calls have been received
from a particular number,
The red incoming call indicator located on the right of your LCD
display will flash when you have received a new call in your absence.
The indicator will continue to flash until you review all the new calls
displayed on the screen. A total of 64 numbers can be stored in the
call log.
A call log entry consists of the following information:
Time and date of the call
ROBERT JONES

CALLER DISPLAY

PRIVATE
will be shown on the LCD display. If
will be displayed on the LCD display. If
will be displayed.
9:52 9/12
01517222277
22
NEW
will be
Sequence number
Call#
within the log
02
Caller's Number
Caller's Name