Phone's Installation; Unpacking The Telephone; Connecting Telephone; Phone's Setting - Geemarc DALLAS20 Mode D'emploi

PHONE'S INSTALLATION / PHONE'S SETTING

4- PHONE'S INSTALLATION

UNPACKING THE TELEPHONE

When unpacking the telephone, you should find the following in the
box:
 1 Dallas 20 unit
 1 Dallas 20 handset with curly cord
 1 Telephone line cord
 1 User Guide

CONNECTING TELEPHONE

1 - Connect the curly cord between the left side of the base and the
bottom of the handset.
2 - Connect the line cord to one of the two socket located at rear of
telephone then connect the PTT plug*.
On the second socket, you have the possibility to connect one other
phone or ringer amplifier for example.

5- PHONE'S SETTING

MOVING IN THE MENU

With the receiver "on-hook", press the
menu, the display reads "SET 1 DATE". Pressing on the arrow keys
and
see the different sub-menus available. Once you have found the sub-
menu you were looking for, press the
made all the necessary changes, press the
next sub-menu. Use the arrow keys
allows you to navigate within the setting menu and
key to enter the setting
key to enter it. After having
and
7
key to move to the
to navigate