Storing An Emergency Number - Geemarc CL320 Notice D'utilisation

EMERGENCY CALLS
This telephone has 3 emergency number memories. Once a number
has been stored in a memory location, you only need press one
button to make the call. The emergency buttons are numbered
M2 M3
or .
When an emergency call is activated the phone will start to beep and
flash for 15 seconds. Then the number attached to the activated
emergency button (
When the first emergency call is connected
message will be heard by the person receiving the call. The recipient
should then press zero on his telephone to accept the call and be
connected to the loudspeaker on the caller's phone. The call is kept
in speaker mode for 3 minutes.
If no one replies or the recipient does not accept the call within 60
seconds, a new emergency call will be initiated (
procedure is repeated until the call is answered and accepted,
though not more than 20 times per emergency button.

Storing an Emergency Number

Use
Enter the telephone number to be stored (maximum of 22
Select the speed dial location (
M1 M2 M3
, or ) will be dialled.
MENU
Press
STORE NUMBER
or to select
OK
Press
digits)
OK
Press
M1
corresponding button
34
M1
, the emergency
M2
or
M2 M3
, or ) by pressing the
M1
,
M3
). This