Tone/Pulse Switch (T/P); Time Break Recall Switch (600/100); Hotel Message Waiting Switch - Geemarc AMPLIPOWER60+ Mode D'emploi

Melody 1
Melody 2
Melody 3
If you don't like the ringer melody,you can choose a new one by changing
the settings as follow:
- Lift the handset.
- Press PROG button.
#
- Press button.
- Press any button 1 to 9.
Ringer will be activated on next call.

4 - TONE/PULSE SWITCH (T/P)

The Tone/Pulse switch is factory pre-set to Tone position (T). In the US,all
telephone exchanges now use Tone dialling.If your phone does not dial out,
it is probably being used from an older private switch- board (PBX). In this
case,theTone/Pulse switch must be moved to Pulse.

5 - TIME BREAK RECALL SWITCH (600/100)

For the US, the TBR switch is factory pre-set to 600ms. It can be switched
to 100ms for other locations or PBX's.

6 - HOTEL MESSAGE WAITING SWITCH

These are used with the new services provided on hotel network.
A switch located behind your phone allows to set ON the hotel message
waiting function.
When the switch is setting ON and when you receive a message, the red
light is lit to inform you that you have a message on phone .
SETTING UP
Low Middle
1 2
4 5
7 8
High
3
6 (by default)
9
7